Service graphs

daily graph weekly graph
monthly graph yearly graph

Graph Information

This graph shows the value of all S.M.A.R.T attributes of drive sde (ST8000DM004-2CX188). smartctl_exit_status is the return value of smartctl. A non-zero return value indicates an error, a potential error, or a fault on the drive.

Note: This service is in WARNING state because one of the values reported is outside the allowed range. Please see further down for information about the ranges and the graph for the values.

Field Internal name Type Warn Crit Info
Raw_Read_Error_Rate Raw_Read_Error_Rate gauge   006:   
Spin_Up_Time Spin_Up_Time gauge   000:   
Start_Stop_Count Start_Stop_Count gauge   020:   
Reallocated_Sector_Ct Reallocated_Sector_Ct gauge   010:   
Seek_Error_Rate Seek_Error_Rate gauge   045:   
Power_On_Hours Power_On_Hours gauge   000:   
Spin_Retry_Count Spin_Retry_Count gauge   097:   
Power_Cycle_Count Power_Cycle_Count gauge   020:   
Runtime_Bad_Block Runtime_Bad_Block gauge   000:   
End_to_End_Error End_to_End_Error gauge   099:   
Reported_Uncorrect Reported_Uncorrect gauge   000:   
Command_Timeout Command_Timeout gauge   000:   
High_Fly_Writes High_Fly_Writes gauge   000:   
Airflow_Temperature_Cel Airflow_Temperature_Cel gauge   040:   
G_Sense_Error_Rate G_Sense_Error_Rate gauge   000:   
Power_Off_Retract_Count Power_Off_Retract_Count gauge   000:   
Load_Cycle_Count Load_Cycle_Count gauge   000:   
Temperature_Celsius Temperature_Celsius gauge   000:   
Hardware_ECC_Recovered Hardware_ECC_Recovered gauge   000:   
Current_Pending_Sector Current_Pending_Sector gauge   000:   
Offline_Uncorrectable Offline_Uncorrectable gauge   000:   
UDMA_CRC_Error_Count UDMA_CRC_Error_Count gauge   000:   
Head_Flying_Hours Head_Flying_Hours gauge   000:   
Total_LBAs_Written Total_LBAs_Written gauge   000:   
Total_LBAs_Read Total_LBAs_Read gauge   000:   
smartctl_exit_status smartctl_exit_status gauge
1